Online Multi-parameter Water Quality Analyzer for Swimming Pool

1. pH value: pH value is an important indicator to measure the pH value of swimming pool water. Generally speaking, the pH value of swimming pool water should be maintained between 7.2 and 7.8. Too low pH value will make the water acidic and irritate the skin and eyes of swimmers; while too high pH value will make the water alkaline and reduce the effectiveness of disinfectants. Therefore, using an online pH sensor to detect the pH value of water quality is an essential task for the swimming pool system.

2. Residual chlorine value: Residual chlorine refers to the residual chlorine content in swimming pool water, which is the main component of disinfectants. Swimming pool water must be strictly disinfected, and the residual chlorine content should be between 1 and 3 mg/L to ensure that bacteria and viruses in the water are effectively killed without irritating the swimmer's respiratory tract. The residual chlorine sensor used in the MCC200 multi-parameter water quality analyzer adopts the principle of film coating method, with high measurement accuracy, stable data and long service life.

3. Turbidity value: Turbidity refers to the content of suspended particles in water, measured in NTU. Too high turbidity will affect the transparency of water and reduce water quality. Usually the turbidity index of swimming pool water quality must be kept below 0.5NTU to ensure the clarity of the water. Our matching turbidity sensor adopts the principle of laser scattering, which can monitor the low range of turbidity values, with high measurement accuracy, small sampling volume, and real-time continuous monitoring of the turbidity value of water quality.

In addition, some swimming pools also need to monitor the ORP value of water quality. The MCC200-A4 multi-parameter water quality analyzer is also compatible with digital ORP sensors. ORP is an indicator of the redox capacity of water and is usually used in conjunction with residual chlorine content to evaluate the effectiveness of disinfectants. Temperature is an important factor affecting swimmer comfort and swimming pool energy consumption. Generally speaking, the temperature of swimming pool water is maintained between 22℃ and 26℃. This multi-parameter water quality analyzer integrates a temperature sensor that can monitor the temperature value of water quality so that staff can adjust heating or cooling equipment in time to ensure that the water temperature is within a comfortable range.

Specification