Suzhou Delfino Environmental Technology Co., Ltd.
Select Language
English
Detailed Introduction of Water Turbidity Analyzer
Introduction A water turbidity analyzer, also known as a turbidimeter or turbidity meter, is an indispensable tool in water quality monitoring. It characterizes the clarity and transparency of water bodies by measuring the scattering and absorption of light by suspended matter in water, serving as a critical indicator in assessing water quality conditions. This article will provide a detailed introduction to the working principle, types, application scenarios, advantages, and disadvantages of...
Industrial pH Probe: Core Tool for pH Measurement
Industrial PH probe, as a key component of PH meter, is the core tool for accurately measuring the pH value (PH value) of solution. It not only occupies an important position in chemical laboratories, but also plays an irreplaceable role in a wide range of industrial applications. The following is a detailed explanation of industrial PH probe. In-depth analysis of working principle: The working principle of industrial PH probe is based on potentiometric measurement, and its core lies in the...
The analog ORP sensor is the core component of the ORP analyzer for detecting water quality. So what exactly is it? Let's briefly discuss it. In the field of environmental protection and water quality management, the oxidation-reduction potential (ORP) sensor, as a key device, plays a vital role. Although digital ORP sensors are favored for their high precision, stability and intelligent design, analog ORP sensors also have their unique value and application scenarios. This article will explore...
How to install the online pH sensors?
Overview The online pH analyzer is mainly composed of a pH sensor and a controller, of which the pH sensor is a consumable item. Its life is closely related to the installation method, the nature of the measured medium, and the maintenance, usually 6-24 months. So what are the installation methods for pH sensors? The installation location of the pH electrode must be selected in the area where the medium is active. It cannot be set in the dead zone. If it is installed in a circulation pool, it...
Applications of Water Turbidity Sensors
The specific applications of water turbidity sensors in the field of environmental protection are extensive and multifaceted. Below is a detailed elaboration on several key aspects: I. Water Pollution Monitoring and Early Warning Real-time Water Quality Monitoring: Water turbidity sensors enable real-time, continuous monitoring of turbidity changes in water bodies, promptly reflecting the concentration of suspended particles. This is crucial for timely detection of water pollution and...
What is an analog pH sensor? Explore its principles and applications in depth ? < img src="https://bsg-i.nbxc.com/product/a5/4c/91/8504863e5a444577696aa441ce.jpg" alt="low quality fake section" /> In the vast fields of science and technology and industrial production, accurate measurement of liquid pH is crucial. As one of the core devices in this field, analog pH sensors have become an indispensable measurement tool in many industries due to their unique electrochemical properties and...
What is Digital PH ORP Controller?
What is Digital PH ORP Controller? Digital PH ORP Controller, a digital instrument for precisely measuring and controlling the pH and ORP (Oxidation-Reduction Potential) values in water or other solutions, is widely applied in water quality monitoring, industrial process control, environmental protection, aquaculture, and numerous other fields. Below is a detailed introduction to the Digital PH ORP Controller: I. Basic Principles The Digital PH ORP Controller measures the pH and ORP values of...
Daruifuno's PH ORP Analyzer: Leading the Way in Marine Exploration and Water Quality Monitoring
Amidst the vast expanse of the azure ocean, where every drop of water holds the secrets of life and the rhythms of nature, Daruifuno, a leading Chinese manufacturer and supplier of water quality analyzers, stands tall with its PH ORP Analyzer, pioneering new frontiers in marine exploration and safeguarding the health of our oceans. Daruifuno PH ORP Analyzer: Guardian of Oceanic pH Balance In the relentless quest to uncover the depths of the sea, Daruifuno's PH ORP Analyzer acts as an...
The role of online pH ORP water quality analyzer in beer brewing process
The online PH/ORP water quality analyzer plays a vital role in the beer brewing process, with its primary functions embodied in the following aspects: I. The Importance of pH Measurement Impact on Flavor and Stability:pH is a crucial parameter in beer, directly influencing its flavor and stability. A suitable pH range helps maintain a balanced composition in beer, preventing the development of undesirable flavors.Beer typically has a pH between 4.0 and 4.5, which favors yeast growth and...
Two-Wire RS485 Interface in Online PH/ORP Controllers
Application of Two-Wire RS485 Interface in Online PH ORP Analyzer · Electrical Characteristics: The RS485 interface utilizes differential signaling for data transmission, where a logic '1' is represented by a voltage difference of approximately +(2-6)V between the two lines, and a logic '0' is represented by a voltage difference of approximately -(2-6)V. This electrical design endows the RS485 interface with excellent anti-interference capabilities and long transmission distances. ·...
What is oil in water and why we need to measure oil in water?
Oil in water refers to the state of oil substances existing in water bodies. These oil substances include crude oil, fuel oil, engine oil, lubricating oil, etc. Oil substances generally exist in water in a suspended or dissolved state. Every year, some oil and its products are discharged into water bodies in the world, causing various degrees of pollution. Daruifuno's online oil in water sensor uses ultraviolet fluorescence method to quantitatively analyze the concentration of oil in water...
What is TDS and how to measure it?
Overview Total dissolved solids(TDS) refers to the total weight of solids(cations, anions and unseparated dissolved substances) in one liter of water(mg/L). This parameter is commonly used for water analysis in different areas, such as in the pulp and paper industry, cooling towers, industrial boilers and environmental testing.The traditional method for determining TDS is gravimetric. Under strict laboratory conditions, a defined amount of sample is evaporated until dry, and the residual is...
What is the relationship between ammonium ions and ammonia nitrogen in water?
The online ammonia nitrogen analyzer developed and produced by Delfino includes and ion-selective ammonia nitrogen sensor and an ammonia nitrogen controller. The ammonia nitrogen sensor integrates an ammonium ion electrode, a pH electrode, and a REF electrode, and calculates the value of ammonia nitrogen. Our controller can not only display the value of ammonia nitrogen, but also display the value of ammonium ions, pH value, and temperature.Sometimes, customers think that the value of ammonia...
The Maintenance Method of Dissolved Oxygen Membrane Cap
The dissolved oxygen sensor uses optical measurement technology based on the principle of fluorescence quenching. The measurement is reliable and accurate, and does not require frequent calibration. The sensor does not require reagents during use, and the maintenance is small. The only consumption is the replacement of the membrane cover every 1-2 years. In actual application scenarios, the membrane cover will be attached with contaminants after long-term use, causing the measurement to be...
How to calibrate the OPD700 dissolved oxygen sensor?
Overview The OPD700 dissolved oxygen sensor supports one-point calibration and two-point calibration. One-point calibration is 100% full-scale calibration. Usually, one-point calibration can meet most usage requirements. Adding zero-point calibration on the basis of 100% saturation calibration is two-point calibration. If the measured dissolved oxygen concentration is relatively low, a two-point calibration is required to obtain more accurate data. < img...
Why and how to monitor the pH value of circulating cooling water?
Circulating cooling water requires the use of an online pH analyzer to monitor the pH value, because the pH value can affect the corrosion and precipitation of the cooling water. If the pH value of the cooling water is too high or too low, it will lead to increase corrosion of metal pipes and equipment. It will also affect the formation of scale and sediment in the cooling water, reduce the cooling effect, and increase energy consumption and maintenance costs. Therefore, monitoring and...
Introduction to the detection method of COD BOD5 NH3-N in sewage treatment plants
Sewage treatment plants are sewage and wastewater discharged from pollution sources. Because the total amount or concentration of pollutants is high and does not meet the discharge standard requirements or does not meet the environmental capacity requirements, thus reducing the water environment quality and functional objectives, it must undergo artificial intensification treatment. place. It is generally divided into urban centralized sewage treatment plants and decentralized sewage treatment...
What is the ion selective electrode method?
Overview Ion selective electrodes (ISE) are modern analytical tools that enable rapid and direct determination of ion activity in sample solutions. Together with a suitable ion meter or titrator, the ISE forms an affordable and versatile measuring system. Like the ph theory, the ISE theory is also based on the Nernst equation. ISE's approach is easy to understand and simple to apply in many situations. Ion selective electrodes are used to measure the activity of the ions being measured. Ions...
What are the effluent quality standards for reverse osmosis water treatment?
With the continuous acceleration of industrialization and urbanization, water pollution problems are becoming more and more serious. How to correctly treat sewage has become the number one problem in the construction of modern cities. As an important water treatment technology, reverse osmosis technology is widely used in various fields. Water quality analysis instruments such as pH analyzer, conductivity analyzer, and ammonia nitrogen analyzer will be used in reverse osmosis water quality...
What is TDS? How to detect the TDS value of water?
TDS is the abbreviation of total dissolved solids, also known as total dissolved solids. The measurement unit is mg/L, which indicates how many milligrams of dissolved solids are dissolved in 1 liter of water. The higher the TDS value, the more dissolved substances the water contains. Total dissolved solids refers to the total amount of all solutes in water, including the content of both inorganic and organic matter. Generally, the conductivity value can be used to roughly understand the salt...
What is the difference between temperature compensation of conductivity and pH?
? Overview The conductivity is closely related to the degree of dissociation of the electrolyte in water and the migration speed of ions, and the degree of dissociation and migration speed are related to the temperature of the solution. As the temperature increases, the conductivity of the solution increases; on the contrary, the conductivity decreases. In order to overcome the influence of temperature and make the conductivity of different solutions at different temperatures comparable, when...
What is the impact of ammonia nitrogen content on aquaculture water?
Ammonia nitrogen refers to the nitrogen present in the water in the form of free ammonia NH3 and ammonium ions NH4+. Ammonia nitrogen is an important water quality indicator that has attracted much attention in aquaculture. Ammonia nitrogen in aquaculture water bodies is composed of non-ionized ammonia(NH3-N) and ionic ammonium(NH4+-N). It mainly comes from the transformation and decomposition of nitrogen-containing substances, including inorganic and organic nitrogen fertilizers, excreta and...
How does the sewage treatment plant deal with the problem of excessive ammonium?
Excessive ammonina nitrogen in water bodies is mostly related to human activities, such as wastewater generated from industrial production, agricultural activities, and sewage treatment. If the high concentration of ammonium nitrogen in these wastewater is not treated or these are problems in the treatment process, it will be discharged directly and cause excessive ammonia nitrogen in natural water bodies. Another situation is when a large amount of organic matter enters natural water bodies,...
What is the sodium difference of pH glass electrode?
pH is a scale of hydrogen ion activity in a solution, which is generally a measure of how acidic or alkaline a solution is. The pH value refers to the logarithm of the reciprocal of the hydrogen ion activity of the solution. The closer the pH value is to 0, the more acidic the solution is, and conversely, the closer the pH value is to 14, the more alkaline the solution is. At room temperature, a solution with pH=7 is called a neutral solution. The glass electrode pH sensor has high measurement...
About Us
Related Products List
Contact Us
Send Inquiry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
