Suzhou Delfino Environmental Technology Co., Ltd.
Select Language
English
| Measuring range | |
| option | |
| Contact Now |
In the water treatment industry, Peracetic acid is mainly used for disinfection, oxidation and removal of organic pollutants. It has high-efficiency bactericidal ability and good oxidation performance, which can effectively remove bacteria, viruses, algae, fungi and organic waste in water. In the process of using peracetic acid, according to the detection results of the Peracetic Acid Sensor, if the PAA content in the water exceeds the safety standard or target range, corresponding control measures need to be taken: according to the monitoring results, properly adjust the disinfectant (including PAA) Dosing amount to control the content of PAA. Change the type of disinfectant: Consider using other disinfectants instead of PAA to achieve better water quality control. Improve water quality treatment process: optimize water quality treatment process, such as adding filtration, oxidation and other steps to reduce the generation or residue of PAA. Compared with other disinfectants, peracetic acid has unique advantages. Therefore, in some industries, peracetic acid is used for disinfection. Daruifuno's P10 peracetic acid sensor can monitor the content of peracetic acid in water in real time. It adopts the film-covered amperometry method, long-term stable operation, and low maintenance cost. And there is no cross-sensitivity to hydrogen peroxide, and the membrane cap only needs to be replaced once a year.
Specification
| Indicator | Peracetic acid |
| Measuring system | membrane covered, amperometric 2-electrode system |
| Signal output | 4-20mA or RS485 |
| Working temperature | 0~45℃ |
| Temperature compensation | Automatically, by an integrated temperature sensor |
| Working pressure | 1 bar |
| Flow rate | 15-30L/H |
| pH range | 1-6pH |
| Response time | T90 about 5min |
| Calibration | At the device, by analytical determination |
| Absence of the disinfectant | Max. 24 h |
| Material | Elastomer membrane, PVC-U, stainless steel 1.4571 |
It should be noted that the following points should be paid attention to when using peracetic acid for water treatment:
- Adequate safety measures are required, including wearing protective gloves, glasses and respirators, etc.
- It is necessary to select the appropriate peracetic acid concentration and reaction time according to the specific situation.
- Avoid excessive use during use, so as not to have a negative impact on water quality.
- Following the use of peracetic acid, the treated water needs to be sufficiently neutralized to avoid negative impacts on the environment.
In summary, peracetic acid is an effective disinfectant and oxidant in the water treatment industry, which can help remove organic pollutants and microorganisms in water. However, it is necessary to pay attention to the requirements of safety and environmental protection during use. Using a reliable, low-maintenance peracetic acid sensor is essential. In addition to peracetic acid sensor, we also provide other disinfection sensors such as Chlorine Sensor, Total Chlorine Sensor, Chlorine Dioxide Sensor, Ozone Sensor, Hydrogen Peroxide Sensor, etc. If you are interested in our products, please contact us.
About Us
Related Products List
Contact Us
Send Inquiry
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now